Capabilities
CNC Machining
2.5D/3-axis milling & turning. Tight tolerances and toolpath optimization.
- ±0.05 mm typical, ±0.01 mm fine
- Post: anodize, bead-blast, powder-coat
- DFM feedback & CAM programming
3D Printing
FDM, SLA/DLP, SLS for concept to end-use parts.
- Layer 50–200 μm
- Nylon12, ABS/ASA, PETG, PA-CF
- Vapor smoothing & dyeing
Sheet Metal & Laser
Cut • bend • weld — brackets, chassis, and enclosures.
- SS/MS/Al, brass, copper
- Spot/MIG/TIG, PEM inserts
- Powder coat & silk-print
Composites
Carbon-fiber, kevlar, glass layups; vacuum bagging & infusion.
- Molds, plugs, autoclave partners
- Lightweight structural parts
- Clear-coat & UV protection
Electronics & PCBA
Rapid PCB fab, SMD assembly, wiring harnesses, functional test jigs.
- 2–8 layer quick-turn
- ESP32, STM32, RP2040 builds
- ICT/jig & firmware flashing
Mechatronics & Rigs
Motion systems, gearboxes, fixturing, pneumatic & motor control.
- Stepper/servo sizing
- Low-backlash drives
- Safety interlocks
Materials, Finishes & Tolerances
Metals
- Al 6061/7075, MS/EN8, SS304/316
- Brass CZ121, Copper C110
- Hard-anodize, passivation, plating
Polymers
- ABS, PC, POM, Nylon (PA), PEEK*
- TPU (shore 85–98A)
- Vapor smooth, media tumble
Composites
- CF twill/plain, Kevlar hybrids
- Epoxy systems (room/high temp)
- Clear-coat matte/gloss
Default: CNC ±0.05 mm • Sheet metal ±0.2 mm • 3DP ±0.3 mm or ±0.5% • Tighter on request after DFM.
Typical Use-Cases
Functional prototypesFast
Enclosures, mounts, jigs; snap-fits, threads, and heat-set inserts.
Robotics & dronesLightweight
Carbon arms, gearboxes, payload bays, gimbal brackets, landing gear.
Medical & labClean
Fixtures, housings, and acrylic panels with smooth edges and labeling.
Pilot productionLow-volume
Bridge runs before tooling; QA sheets, SPC, and packaging.
Pricing & Engagement
Proto Express
48–72 hrs₹ 9,900+
3D print/CNC quick-turn. Basic finishing.
- 1–3 parts • PLA/ABS/Al
- DFM check & fit tweaks
- Local pickup/ship
Assembly Pilot
1–2 weeks₹ 49,000+
Multi-process build with basic electro-mechanical assembly.
- Up to 20 parts/set
- Coating/branding options
- QA checklist & test
Bridge Production
Batch₹ —
Low-volume runs with supply, QA docs, and packaging.
- BOM & vendor alignment
- SPC/CoC on request
- Repeatable schedules
Pricing excludes materials & taxes • 18% GST applies • Rush fee may apply for Express.
Toolchain
CAD/CAM: Fusion 360 • SolidWorks • FreeCAD • PrusaSlicer • Cura • LightBurn •
Metrology: Vernier/CMM • Surface gauges • Thread gauges •
Electronics: KiCad • Altium (import) • JLC/Seeed flow •
Docs: Drawing revs • GD&T • DFM notes • QA checklists